How to Fix? iPhone/iPad Won’t Turn on

Our iPhones and iPads have become integral parts of our lives, serving as communication devices, entertainment hubs, and productivity tools. However, encountering a situation where your iPhone or iPad won't turn on can be both alarming and frustrating. The good news is that there are various potential reasons for this issue, and in many cases, there are steps you can take to resolve it.

In this article, we'll explore the common causes behind an unresponsive iPhone or iPad and provide effective solutions to get your device up and running again.

Part 1. Why my iPhone won’t turn on?

Before delving into the solutions, it's important to understand some of the common reasons why your iPhone or iPad might not be turning on:
⛔ Battery Depletion: Sometimes, the most straightforward explanation is the most accurate. If your device's battery is completely depleted, it won't turn on until it's charged.
⛔ Software Glitches: Occasional software glitches or crashes can lead to unresponsiveness, preventing your device from turning on.
⛔ Hardware Malfunction: Hardware issues, such as a faulty power button or a damaged charging port, can prevent your device from powering on.
⛔ Water or Physical Damage: Exposure to water or physical damage can cause internal components to malfunction, rendering your device unresponsive.
⛔ Failed Updates: If an iOS update fails to install correctly, it can result in an unresponsive device.
⛔ Overheating: Extreme temperatures, especially overheating, can lead to your device not turning on until it cools down.

Part 2. How to fix iPhone/iPad won’t turn on

Here are several effective solutions to address the issue of your iPhone or iPad not turning on. Try the following solutions to know how to turn on an iPad/iPhone that won’t turn on.

1# Force restart iPhone/iPad

In the event that your iPhone/iPad that won’t turn on or boot up, your initial troubleshooting step involves performing a force restart on the device. It's important to note that initiating a force restart will not result in any data loss. This method remains effective even when the touchscreen buttons fail to respond.

Force restart iPhone
iPhone 8 and later: Press and quickly release the Volume + button > Perform the same operation on the Volume - button > Press the Side button and release when you see the Apple logo.
iPhone 7/7 Plus: Press and hold both the Volume - button and the Power button > Release both buttons when the Apple logo appears.
iPhone 6s or earlier: Press both the Power button and the Home button for seconds > Release both buttons when the Apple logo appears.

Force restart iPad
For iPad with a Home button: Press and hold the Top button and Home button > Release both buttons when you see the Apple logo.
For iPad without a Home button: Press and hold the Volume button closest to the top button, then quickly release it > Perform the same operation on the other Volume button > Press the Top button and release it when Apple logo appears.

2# Check for water/physical damage

Inspect your device for any visible physical damage, such as a cracked screen or dents. If you find any, it's possible that the damage is preventing your device from turning on. If your device has been exposed to water, it also might not turn on due to internal damage.

If this is the case, you should avoid trying to turn it on and seek professional repair as soon as possible.

3# Try to charge your iPhone/iPad

If your device’s battery is completely drained, it won’t turn on until it receives some charge. Simply connect your iPhone or iPad to a power source using the original charging cable and adapter.

Usually, you will be able to see the normal charging screen after only a few minutes of charging. Allow it to charge for at least 15–30 minutes before attempting to turn it on.

4# Restore in recovery mode

In situations where your device's software experiences significant corruption, you may find it necessary to restore it using recovery mode. You should be noted that putting your iPhone/iPad into recovery mode will erase data from the device.  Therefore, if it is possible, it is suggested to backup your iPhone/iPad before the task.

Step 1. Connect your iPhone /iPad to computer and open the latest version of iTunes.

Step 2. Once your device is recognized, put your device into recovery mode by force restarting your devices by following steps in 1#. Then, you will go to recovery mode.

Step 3. After you have entered recovery mode, select Update or Restore according to your situation. Follow the prompts to restore your iPhone/iPad.

• Restore: Choose Restore, it will download the latest version of iOS for your device, and erase the entire contents.
• Update: Choose Update, it will download the current iOS version, but won’t erase all contents, instead overwriting the iOS and not touch your user data.

Conclusion

That’s all for how to fix iPhone or iPad won’t turn on. It can be a nerve-wracking to experience an iPhone or iPad that won’t turn on. But follow the step-by-step fixes outlined here, hope you can troubleshoot the problem. For more queries, suggestions, or feedback, feel free to contact us.